O termômetro mais complicado do mundo
Depois de meses passando frio na Nuvem, já era hora de entender se a sensação térmica era real, imaginária ou provocada pela umidade. Juntando algumas do jardim para epicuro (da cinthia) e da minha fonte para pescar satélites, fiz o termômetro que provavelmente é o mais desnecessariamente complicado. Ficou bonito.
Aqui vai o esquema de funcionamento do circuito. Um 7805 regula a voltagem do transformador em 5v, o que alimenta o arduino, sensor e tela oled. O regulador de voltagem do arduino também dá 5v mas a corrente que ele fornece era insuficiente para a tela.
O sensor de temperatura LM35 dá a temperatura em Celsius, mas o arduino precisa de uma voltagem de referência para a entrada analógica. Por isso conectamos duas saídas do sensor. O arduino faz as contas e envia o número usando o protocolo serial do display oled. O programa de arduino está abaixo:
{
- include<stdlib.h>
- define LM35pin 2
- define LM35ref 1
long referencia; float v_alim, temp_c; byte data[20]; void setup() {
// initialize serial communications at 9600 bps: Serial.begin(19200); delay(1000); Serial.write("U"); // send an U to the oled so it can fix the baud rate delay(100);
}
void loop() {
delay(1000); Serial.write("E"); //clear screen delay(100);
int analogVal = 0; for(int i = 0; i < 10; i++) { // read 10 times the sensor and calculates the average analogVal += (analogRead(LM35pin)-analogRead(LM35ref)); delay(10); } temp_c = (5.0 * analogVal * 10) / 1023; char t[5]; dtostrf(temp_c,2,1,t); //convert to string printSgc(t, 10,50,0,255,255,5,5); //send the string to the display
//Serial.println(temp_c);
}
long readVcc() {
long result; // Leemos la referencia de 1.1V contra AVcc ADMUX = _BV(REFS0) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1); delay(2); // Esperamos a que Vref se estabilize ADCSRA |= _BV(ADSC); // Convertimos while (bit_is_set(ADCSRA,ADSC)); result = ADCL; result |= ADCH<<8; result = 1126400L / result; // Calculamos AVcc en mV return result;
}
boolean sendSerial(String text) {
Serial.print(text); delay(10); int result = Serial.read(); if (result==6) return true; else return false;
}
boolean printSgc(char * text, int x, int y, int font, int color_1, int color_2, int w, int h) {
Serial.write("S"); Serial.write(x); Serial.write(y); Serial.write(font); Serial.write(color_1); Serial.write(color_2); Serial.write(w); Serial.write(h); for (int i = 0; i< strlen(text); i++){ Serial.write(text[i]); } Serial.write(0,1); delay(10); int result = Serial.read(); if (result==6) return true; else return false;
} }